wanted 6 spline V8 quick change gears

[turborick]

Looking for a #2a 6 spline V8 quickchange gear. winters don't make the 2a anymore. need one bad for speedweek

[jdincau]

I don't have that set, have you tried
http://www.1speedway.com/Quick_Change_Gear_Charts.htm

[fwillyj]

-here's a link to a 1" wide #2 set for $65---don't know what a 2A set is.

-winters shows all the 6 spline stuff in two different widths---but no 2A sets.

http://pitstopusa.com/i-5081098-winters-4400-series-6-spline-quick-change-gears-midget-8-3-8-ring-gear-1-wide-set-2.html

[RichFox]

Yeah. My chart shows a #2 set. 23 and 24 teeth. I believe I have that one. Is that what you are looking for?

[turborick]

gearset #2A   17 and 18 teeth 1.059 spur ratio
if you look at the older gear charts the 2A shows up then in the newer ones it's gone

[jdincau]

gearset #2A   17 and 18 teeth 1.059 spur ratio
if you look at the older gear charts the 2A shows up then in the newer ones it's gone

Check out my link above, Speedway engineering in Sylmar still shows it in their chart

[turborick]

Yea I tried Speedway.... that's were I normally get my gears from

[RichFox]

I will check with Norm Rapp this morning

[jdincau]

these guys list it too

http://www.quartermasterusa.com/

Don't know if any of these actually have the gears in stock, but it's what google comes up with

http://www.proracestore.com/index.php?main_page=product_info&products_id=21655

http://www.chicane23store.com/index.php?main_page=product_info&cPath=1&products_id=21655

http://www.rennsportstore.com/index.php?main_page=product_info&cPath=15226_17409_17410&products_id=21655

[turborick]

I didn't know about the Quarter master gears.... they make a 2A with a 35/37 tooth count and almost the same gear ratio 1.057 vs a 1.059
will call them

[RichFox]

No luck at Norms.

[4-barrel Mike]

http://www.scsgearbox.com/quick-change-gears.html ??

Mike