The fuel line with fire sleeve is bulky and getting in the way of my new monster size air filters. A fireproof braided steel line will be perfect. There is a little space where I can tuck it in out of the way. The fuel tap spigot is shown in one picture and the carb spigot is in the other. The hydraulic line salesman says I need to put two inch long pieces of rubber tubing on the carb spigot and the fuel tap, have a fuel line made with a hose barb on each end, and I would stick the barbs into the short hose sections on the spigots. The hose sections, only, would need to be shielded. Is this the best way? Is there a way to attach the braided line directly to the spigots?