Hi all, I am part of a Boise State club called Greenspeed working on an Chevy S10 running in the DT class with a cummins 5.9l power plant.
What is the min/max wheel width for the LSR tires (2284 & 2270)? Goodyear spec's 4.5" and 9", but this makes sourcing viable wheels almost impossible inside our budget. Once I know the acceptable widths I can find wheels and then choose the appropriate hub.
The rules state we need to have 1/2" studs minimum making the stock hub/rotor obsolete. I am looking at either USB stock hubs with 5/8" studs or Howe or Coleman hubs in either a 5x5 or stock 5x4.75 configuration. Since we are not running front brakes the rotors are of no concern (this year).
The rules also state that all non-ferrous wheels need .25" thick washers. Anyone have a good description of this setup? Since all narrow wheels I've found are aluminum.
Oh, and since the 25" LSR's are gone for the year would you recommend 23" or 28" front tires if you had to choose?
Thanks for the help and this forum!