Landracing Forum
Fundraising, For sale, and Wanted => For Sale by Private Parties => Topic started by: kiwi belly tank on May 13, 2018, 01:11:51 AM
-
Just spied it on Ebay, looks interesting.
Sid.
https://www.ebay.com/itm/Bonneville-Streamliner-Frame/123123173762?hash=item1caab68982:g:e2IAAOSwV5Za8lxz
-
6 bills w/ tires?? Good deal.
-
be interesting to know what front diff. setup was planed
-
Use anything you want really, turn it up side down & it will go forward.
Sid.
-
oiling might be a little strange :-D
-
Oil Pump. :-D
Sid.
-
Use anything you want really, turn it up side down & it will go forward.
Sid.
Radio Flyer steering?
Mike
-
I have a spool that will work from Hub City. If anyone here buys this we can talk. If have 1.5 and 2.0 gears for it.
-
Use anything you want really, turn it up side down & it will go forward.
Sid.
Radio Flyer steering?
Mike
You probably should see the front end in my liner Mike, it's up side down & so is the steering box. :-D & no down under jokes alright! :wink:
Sid.
-
those drawings almost look like rear wheel steer was the plan....Now I`m afraid.....
-
Don't think rear wheel steering is allowed.
-
There was a yellow roadster some years ago that caught my eye as I walked by it that made me take a second look. It had a 9" in the front & a twin I-beam in the back with steering. I asked the guy how it drove & he said not bad!
Thrust SSC was rear steer too, but it only went 763. :roll:
But I think Glen is right.
Sid
-
At the Salt Talks a few years ago, I asked Andy Green how he got used to rear steering on Thrust SSC, he said he never did get use to it!
Regards, Neil Tucson, AZ
-
Can anyone please find out the tire sizes andwhat make please?. Thanks in advance. :cheers:
-
Sold...and I`m not seeing ANY steering
-
See?
-
At Bonneville you just go straight. Right? Who needs steering?
-
I also don't see an engine in the drawing. Guess this thing is powered by hopes and dreams without steering.
-
Looks like they were planning on a quick change axle. The center of the diff is not lined up with the center of the axle. Not sure how that would work.
-
Thaw drawing puts the sketch in sketchy.........what? Its FRIDAY :cheers: :cheers: :cheers: