Landracing Forum
Bonneville Motorcycle Speed Trials => Bville Motorcycle Speed Trials Rules Questions => Topic started by: Darin Mellor on November 15, 2017, 02:04:54 PM
-
Allowable overbore in this class is + .050- inches over
OEM standard bore to remain in displacement class. Further
increased displacement beyond the class limit shall place the
motorcycle in the correct class.
So if I had a 175cc engine and overbore it 0.050",which would put me over 175cc, would I still stay in the 175cc class?
-
If you have a <175cc with stock bore, and bore it .050 over stock bore size, you will remain in the 175cc class. If you have a <175cc engine and bore it .050 past 175cc you will run in the next higher class. The key is .050 over stock bore is allowed for cylinder repair.
-
Ok thank you very much