Landracing Forum

Loring Timing Association (Maine) => Loring (AFB) land speed venue => Topic started by: Truckedup on August 02, 2016, 10:24:18 AM

Title: Rear fender in A class
Post by: Truckedup on August 02, 2016, 10:24:18 AM

 I did read the rule book.....But as usual I'm easily confused  :-D  Is a rear fender or tail section required for a naked frame A class bike?  Thanks

Title: Re: Rear fender in A class
Post by: Jessechop on August 02, 2016, 12:23:37 PM

No, but you need to not be able to contact the tire. Shoot me a picture if you want

Title: Re: Rear fender in A class
Post by: Truckedup on August 03, 2016, 06:16:07 AM

 Here's the bike ,the pipes are just junk for the photo...The rider seat will be on the flatter section of the seat frame, the kick up is more of a grab bar..


        (https://c2.staticflickr.com/8/7316/27586499964_81a62479b7_c.jpg)
 

Title: Re: Rear fender in A class
Post by: Jessechop on August 03, 2016, 08:56:27 AM

That would need a fender. One good bump and the rider would be on the tire

Title: Re: Rear fender in A class
Post by: Truckedup on August 03, 2016, 04:04:34 PM

 Ok, I assume just a short fender just past the rear axle similar to an M class bike?

Title: Re: Rear fender in A class
Post by: Jessechop on August 03, 2016, 06:03:49 PM

Yes, centerline of rear axle