Landracing Forum

Tech Information => Safety => Topic started by: filmermikey on July 28, 2014, 11:09:08 PM

Title: motorcycle frame size
Post by: filmermikey on July 28, 2014, 11:09:08 PM
Is there a minimum diameter or thickness for a motorcycle frame? If so what is it?
Title: Re: motorcycle frame size
Post by: Stainless1 on July 28, 2014, 11:54:37 PM
No, but weight is not a factor for Bonneville.  Build it like your life depends on it.... it does.
Title: Re: motorcycle frame size
Post by: filmermikey on July 29, 2014, 01:20:27 AM
No, but weight is not a factor for Bonneville.  Build it like your life depends on it.... it does.
well because I'm building a 2 stroke motorized bicycle for the flats, so I was wondering if I needed to build a new custom frame or not
Title: Re: motorcycle frame size
Post by: Stainless1 on July 29, 2014, 10:30:59 AM
I suspect the factory frame will pass and be OK for the speeds you are anticipating unless the 2 Smoke is an old TZ.  :roll:
 :cheers: