Landracing Forum

East Coast Timing Association => ECTA Rules Questions => Topic started by: Joe Timney on November 18, 2011, 02:32:39 PM

Title: ECTA approved the use of SCTA style seat/tail section
Post by: Joe Timney on November 18, 2011, 02:32:39 PM

Ok Motorcycle fans...one more change for you today. We will be adapting the SCTA streamlined seat/tail section rule in Special Construction. As always, we will reserve the right to limit speed due to wind conditions. Have we made you HAPPY!!!

Title: Re: ECTA approved the use of SCTA style seat/tail section
Post by: 55chevr on November 18, 2011, 04:48:12 PM

Yes you have made at least me happy. It is sometimes challenging to build a bike to one spec and then rebuild it to meet another sanctioning body's spec.   Way to go Joe ...

Joe

Title: Re: ECTA approved the use of SCTA style seat/tail section
Post by: fredvance on November 18, 2011, 04:51:13 PM

Oh yeah. Now I can run my long tail at Loring. Of course I have to get it built first. :roll:

Title: Re: ECTA approved the use of SCTA style seat/tail section
Post by: dr j on November 18, 2011, 08:18:09 PM

Joe T,
Thanks for the fast response. As Joe Daly said it is wonderful to be able to make custom fairings the same for 2 organizations.  Now if only BUB was the same too........but no, they have the old tail rules with a different front fairing rule.  Oh well. As Meatloaf said, "Two out of three ain't bad."

Title: Re: ECTA approved the use of SCTA style seat/tail section
Post by: 2fast4u2c on November 19, 2011, 03:52:45 PM

Awesome Joe, now get on the stick and lets get our drogue chute deployment 5" can ready so I can Fab the subframe once you've weighed the bike.  We'll need that rule for sure.

Guy