Best time was only 74.14 mph. BUT - I have a lot of excuses( ha-ha
). I had ordered an Innovate LM-2 Wideband O2 monitor, but didn't get a chance to use it before I ran at Maxton. So I had to run the bike really rich, needed to change plugs after every 2 runs. Also, had some clip ons that didn't get put on, so I was very upright when I ran (tuck almost non-existent). Bike wasn't geared correctly and I didn't have the sprockets I needed with me. Had a lot of trouble finding the 44 year old jets I need for the carbs, so I did the best I could with what I had.
Looking to run again in Sept and Oct at Maxton with hopefully better results this time. Decided to dump the stock carbs and ordered some new PE22 Keihin's, that at least can get jets for. Now I need to make new manifolds for the carbs and modify the plenum since the old ones won't work. Did get the clip on's installed and remeasured my frontal area with a better tuck and reduced it by 28 percent. Now have a better selection of sprockets that I can experiment with. Did finally get the LM-2 working and recording, so tuning should be easier now. I need to get this all sorted out in 36 days, since I plan on going to BUB.
But, I had a lot of fun and a very nice time. Met a lot of nice folks and look forward to giving it another try when it's not quite as HOT.