Tubing Bender Stands

[javajoe79]

 Mine is mounted to a post that is welded to a plate that is welded to half of a big truck wheel. The wheel has two little wheels on the side so that when you tilt the whole setup, it rolls so I can roll it over in the corner when I am not using it.

[Streetwerkz]

Check out theofn.com, there is a ton of ideas on there for tube bender stands

[BAILEIGH INC]

Ask and you shal receive

http://www.offroadfabnet.com/forums/showthread.php?t=531

[Glen]

It's always interesting how a thread gets started and how much info comes from it. There are many tips in the tech file. Someone has done it, research it, modified it and helps others in many ways. Of all web sites this one is the best in the world of LSR as there are no spec vehicles. The builds are always interesting and in many cases someone will spot something in a photo and suggest the builder change one of the details for better strength, etc.

[Seldom Seen Slim]

This thread is a good example of one where a company or professional has contacted me and asked/offered to put his commercial product wisdom on the Forum.  Baleigh Inc. has a link to their company website and refers in posts to their product - but mostly is giving good information that some (many?) Forum members don't have.  No complaints from me.

Jon
Owner, landracing.com

[Cajun Kid]

Glen,,, I agree 100%,,,, I post pics of all my builds/projects.. race cars, rat rods, even my new shop,,, I enjoy the comments, suggestions, critiques etc,,, These posts have saved me a bunch when I had a part on my project that would have not passed tech, someone noticed it and nicely suggested I may have a problem, I contacted the SCTA and in fact I did have a problem, we corrected it and all is well,,,

Imagine if I found out in the tech line 2500 mile from home with no spare bellhousing

This forum is GREAT and so are 99.99% of the folks on here.

Charles