Landracing Forum Home
November 23, 2017, 08:56:34 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
BACK TO LANDRACING.COM HOMEPAGE
 
   Home   Help Search Calendar Login Register  


(Note: Donations are not tax deductible)







Live Audio Streaming and Archives of Past Events
Next Live Event: TBD
Pages: [1]   Go Down
  Print  
Author Topic: Frame jig  (Read 4567 times)
0 Members and 1 Guest are viewing this topic.
sheribuchta
Sr. Member
****
Offline Offline

Age: 60
Location: Modesto,California
Posts: 517





Ignore
« on: February 27, 2008, 07:11:44 PM »

the jig is up...
Willie had some free time yesterday so he finished up his jig. He already had the I beam which is 8inx8inx10ft long flat beam(Some beams have a crown). The cross members are 2x2 in. square tube. They have 2 pieces of angle iron welded on the bottom to keep them squared and centered on the beam. The top has a 1/2 in. slot milled on the top. A piece of angle iron with a hole, a bolt and a piece of flat 1/4 inch inside drilled and tapped. The angle iron on top slides in and out or turns it any angle. There are 6 crossmembers, one every two feet. This particular jig is set up for a frame that I am going to build. I probably won't start the project till May because I am loaded down with other projects right now.
See you on the dirt and on the salt.
Willie Buchta
Logged
sheribuchta
Sr. Member
****
Offline Offline

Age: 60
Location: Modesto,California
Posts: 517





Ignore
« Reply #1 on: February 27, 2008, 07:18:36 PM »

here are the pics


* jig1.JPG (132.91 KB, 917x688 - viewed 272 times.)

* jig2.JPG (107.77 KB, 917x688 - viewed 262 times.)

* jig3.JPG (98.07 KB, 917x688 - viewed 326 times.)

* jig4.JPG (107.41 KB, 917x688 - viewed 326 times.)
Logged
sheribuchta
Sr. Member
****
Offline Offline

Age: 60
Location: Modesto,California
Posts: 517





Ignore
« Reply #2 on: February 27, 2008, 07:21:10 PM »

more pics  left click on mouse to enlarge


* jig5.JPG (107.82 KB, 917x688 - viewed 297 times.)

* jig6.JPG (93.02 KB, 917x688 - viewed 287 times.)

* jig7.JPG (82.09 KB, 917x688 - viewed 258 times.)

* jig8.JPG (117.26 KB, 917x688 - viewed 351 times.)
Logged
fredvance
Hero Member
*****
Offline Offline

Age: 74
Location: Bulverde TX
Posts: 2297



WWW

Ignore
« Reply #3 on: February 28, 2008, 10:47:24 AM »

Willie, what is the jig for? what are you building?
Logged

WORLDS FASTEST PRODUCTION MOTORCYCLE 213.470
Vance&Forstall Racing
WOS 2011 235+MPH
Engine by Knecum, Tuned by Johnny Cheese.
Sponsers Catalyst Composites, Johnny Cheese Perf, Knecum Racing Engines, Murray Headers, Carpenter Racing
sheribuchta
Sr. Member
****
Offline Offline

Age: 60
Location: Modesto,California
Posts: 517





Ignore
« Reply #4 on: February 28, 2008, 11:00:55 AM »

a streamliner  for a customer  i will post the build here    willie buchta
Logged
Bob Drury
Hero Member
*****
Offline Offline

Age: 71
Location: Vancouver,Wa.
Posts: 2517




Ignore
« Reply #5 on: February 29, 2008, 04:42:55 PM »

Forget the jig, I just want the shop.  Nice to see a clean floor.  It says a lot about the craftsmanship of the owner.................. and no, I don't know him............Bob
Logged

Bob Drury
SPARKY
Global Moderator
Hero Member
***
Offline Offline

Age: 75
Location: Phoenix
Posts: 6264




« Reply #6 on: March 02, 2008, 07:51:43 AM »

Willie---thanks for the picts---I can see some new attachments coming for my JIG---thanks for the ideas
Logged

Miss LIBERTY,  changing TKI  to noise, dust and RUST!!!

The # 1 issue is: TO KEEP THE REPUBLIC      
   Center for Self Governance            tncsg.org     mrspowell.org

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller
1212FBGS
Hero Member
*****
Offline Offline

Age: 57
Location: Vista, Ca
Posts: 2532


WWW

Ignore
« Reply #7 on: March 02, 2008, 03:27:45 PM »

what kind of liner?
kr
Logged
sheribuchta
Sr. Member
****
Offline Offline

Age: 60
Location: Modesto,California
Posts: 517





Ignore
« Reply #8 on: March 02, 2008, 04:41:02 PM »

kent   i was in the shop this morning i turned on a band saw it was makeing a strange noise i listened to it for a while and i swear it sounded like  landracing-landracing-landracing-landracing over and over again i finally turned it off and went in the house and realized i had forgot to take my morning meds----a sidecar of course     willie buchta
Logged
bak189
Guest

« Reply #9 on: March 02, 2008, 05:22:38 PM »

O.K.....now we have 3 sidecar streamliners...and one in the works......what is this world comming to?....................................................................................
Logged
JackD
Hero Member
*****
Offline Offline

Age: 71
Location: The great race track in the heavens above
Posts: 4684




Ignore
« Reply #10 on: March 02, 2008, 06:56:24 PM »

O.K.....now we have 3 sidecar streamliners...and one in the works......what is this world comming to?....................................................................................

CRUTCHES cool
Logged

"I would rather lose going fast enough to win than win going slow enough to lose."
"That horrible smell is dirty feet being held to the fire"
willieworld
Hero Member
*****
Offline Offline

Age: 72
Location: 921 chicago ave modesto ca. 95351
Posts: 1818





Ignore
« Reply #11 on: July 18, 2008, 12:09:40 AM »

hello all   i had some time so i finally got the frame jig painted

here is the finished project


willie buchta


* 100_0743.JPG (98.3 KB, 1009x757 - viewed 274 times.)
Logged

willie-dpombatmir-buchta
saltfever
Guest

« Reply #12 on: July 18, 2008, 12:52:50 AM »

Thanks for posting the pics, Willie. Some very nice ideas.  The paint job looks nice.  I hate to see the jig after the project is over when all the extra tabs and gizmos have been randomly ground or welded all over it as the need arises  grin
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!


Google visited last this page December 22, 2016, 07:46:41 PM